Wall Heaters


Stelpro ARWF1501W Electric Wall Heaters

Points To Consider When Buying Electric Wall Heaters

Author: Harry Worthington

Almost everyone all around the world feels more lively and energetic when they come back to the warmth of their home after a whole day's work. So if you too wish to bring in this atmosphere of cosy warmth into your home, you could consider the various electric wall heaters that are easily available all around the United Kingdom today. However, before you invest in these heaters for your home, there are a few points that you need to keep in mind.



Before you invest in a wall heater that runs on electricity for your house, it is essential that you measure the rooms of your home as accurately as possible. This is essential because of the fact that the power and intensity of the heater that you buy will be dependent according to the size of the room that you are buying it for. The amount of heat that is required to heat a room of a specified area needs to be determined by the size of the room, and will in turn affect the size of the heater that you will need to choose.

The second most important point that you need to consider while choosing a heater that will suit your home is the BTU that is associated with these heaters. The acronym BTU is known as the British Thermal Unit and is used to indicate the amount of heat that any electronic device can generate. This will of course have a direct impact on the electricity consumption of the heater and can cause quite a setback to your overall monthly budget if the consumption is abnormally high.

While choosing electric wall heaters, it is essential that you look into the fact that the heater allows the user to vary the temperature as well as the heating measures, with respect to the change of weather. Thus, by choosing a heater with a variable temperature facility, you can ensure that you are provided with many advantages. This could indicate that you will also save on the electricity consumption of your wall heater during the months of summer, when the need for heating the room would of course be reduced.

Another criterion that you can use to separate the good heaters from the best ones would be to check if the heater has a built in system of oscillation. Using this system, the heat can be spread more evenly all around the room. This is especially important in the case where the heater has to be mounted on the wall, as they are not portable and cannot be carried manually to all the corners of the room.

Always opt for a heater that can provide you with an auto switch off, as well as heat guards. This can prevent burn accidents or over heating of the room, in case you forget to switch off the gadget manually.

By keeping these points in mind you can ensure that your investment is just as great as you had planned it to be and this can allow you to spend hours of cosy togetherness with your family, and can forget the world outside completely!

Article Source: http://www.articlesbase.com/diy-articles/points-to-consider-when-buying-electric-wall-heaters-2014454.html

About the Author

Have you just bought a new house or are you looking to improve your own home? Why not look at Electric Wall Heaters? Electrorad is a Leeds based company that can help you with this. For more information please visit the website at http://www.electrorad.co.uk/


Comments

  1. kc0tmj says:

    wall heaters?
    how do i gaurd a wall heater from children is there a way to Guard them?

  2. KenlKoff says:

    There is just not a lot that can be done with such a limited depth but, Recessed shadow boxes is something I have done in the past.

  3. ronow says:

    Can I wire two seperate 220 wall heaters using one 12/3 wire?
    I am installing wall heaters as part of basement renovation. I was told I can run two wall heaters off one 20amp breaker. Can I run two heaters off one line?
    The heaters are maximum 8.5 amps. They are “pic-a-watt type and we’re setting them at 1750 watts.

  4. pvreditor says:

    You can install some sort of screen around the heater — a hardware store should either have a kit or materials that you can use. Obviously, you have to watch the children carefully. The good news is that if a child burns a finger, that will be a strong incentive to never touch that spot again.

  5. Michael C says:

    How do you check to see if your wall heaters have a blown element?
    huge electricity bill, got one of those wattage output devices and the wall heater is the only one we cant check because of pin size.

    Any help?

  6. Dan B says:

    Depends upon the wattage of the heaters. But I think you’ll be running too close to the max power the wire and circuit breaker can handle. You would be much safer running each heater on their own line. I believe code requires all 220 vac appliances be separately wired and protected.

    12/3 can only handle 20 amps at 120 vac. That’s 2400 watts. So, if you have 220 vac, the current can only be 10 amps maximum. We are told that 12/3 can handle 20 amps. That’s presuming it is connected to a standard 120 vac line. It’s not 20 amps and ANY voltage.

    If one of the heaters is more than 2400 watts, you need to use heavier gauge wire.

  7. antiiowan says:

    does anyone know where to look to find info on day & night wall heaters?
    i have a wall heater that i can service, but the upper blower unit is not that familiar to me. if i could find some site to figure the procedure to dismantle the blowers, from the main burner section.

  8. W. C. says:

    Wall heaters have their own circuit, so you can test at the fuse/breaker panel.

    Remove the panel cover & carefully clamp your meter around one of the load feeds coming from the breaker, then turn on the heater.

    I would also check each connection screw for tightness, both on the neutral buss bar & at the load side of each breaker/fuse.

    If you are not comfortable working inside of an electrical panel, call an electrician.

    Good luck…

  9. gary o says:

    Check the Internet for the manufacture, but you may need the model number for them to help you. Day & Night must have a web site.

  10. jbrandtc says:

    What are some options for replacing in-wall heaters?
    We’re switching over to a heat pump with forced air and pulling out wall heaters throughout the house. Instead of just patching up the holes from the heaters, which are about four inches deep, what are some other options?

Leave a Reply