Hot Tub Chemicals


Natural Hot Tub Chemicals | Hot Tub Silver | Purest Colloids

Learn Why Hot Tub Chemicals Are Important For Your Hot Tub

Author: Ravi Shankar Singh

For a very reasonable cost you can increase the life of your hot tub cover by literally years. It's not difficult to extend its useful life and in this article we discuss some easy ways to protect your investment.



Discover why you require chemicals in your hot tub and what to use. No one wants dangerous water born bacteria in their hot tub. So the best way to keep them at bay is by using hot tub chemicals. Even though, chlorine is utilized in swimming pools, it not recommended in hot water as it loses it's bacteria fighting properties as temperature goes over 80 degree. For hot water, chemicals are specifically designed and have the dual advantage of keeping the water crystal clear.

You will need hot tub chemicals that will safely eliminate any of the following that might be in your hot tub water:

Natural body oils and sweat
Tanning lotion - do you get in and out of your hot tub in sun bathing sessions?
Moving water caused by jets of pressure causes foam to form

You will require getting into a routine of adding hot tub chemicals on a regular basis, checking the water and then adding the chemicals to keep the levels up to the desired rate. If you want your water clean and clear, maintaining pH factor of the water will be an important part of your routine. You will find many brand products available to select from. Based on the above list, you can buy chemical to deal with each of these problems:

Training lotions, natural body oils and sweat need water purifier that will break down the oil and eliminate from the water.
You can save lime and calcium deposits from building up using specialist chemicals, which can also be utilized to break them and flush them out of your tub.
Lime scum is eliminated by specialist cleaners that come in the form of paste.  
Foam can be prevented using anti-foaming hot tub chemicals

As you know it's important to keep your hot tub clean and free from bacteria and otherwise water borne contaminants will spoil your enjoyment of your hot tub.

Arctic Spas dealing in wide range hot tubs, hot tub accessories and hot tub chemicals to meet your specific requirements. If you are looking to buy hot tubs or accessories or chemicals, Arctic Spas will be the right choice for you!

Article Source: http://www.articlesbase.com/bath-showers-articles/learn-why-hot-tub-chemicals-are-important-for-your-hot-tub-1220667.html

About the Author

Shailesh Smith


Comments

  1. OneRunningMan says:

    Invite a bunch of kids into your hottub, they should raise the PH level! jk

    “sodium bicarbonate or baking soda raises the kH and pH as mentioned by Goldy. As mentioned, at low pH, the good bugs do not thrive well and the filtration suffers. A pH level between 7.0 to 8.0 would be good. pH should not be raised suddenly to prevent pH shock. Therefore baking soda should be added little by little over a few days. A dosage of 25-50g per 1000L per day until the desired pH is achieved should be OK. As it is easily soluble in water, dissolve it in a pail of water and distribute evenly over the pond. It may need to be replenished after sometime depending on the stocking level as it is being used up by the filter. A more permanent solution of maintaining alkaline pH is to use shells (oyster, cockle) as pH buffers. They act by releasing carbonates slowly.
    If the ammonia level in the pond is very low, there shouldn’t be much danger in raising the pH slightly. As for the location of the UV, I would prefer to place it at the last stage of filtration, that is after the biomedia, and in a separate chamber.”

  2. PDY says:

    How can I raise the Ph in my hot tub without commercial chemicals?
    I have a hot tub and everytime I test the water the Ph if very low. The chemical to bring the Ph up is very expensive. Does anyone know of a product I can use to raise the Ph- perhaps something commonly found in the home that would be safe to put in a hot tub. Please – serious answers only.

  3. Matt C says:

    Hot-tub Chemicals?
    I have looked on alot of sites and I cannot find what I am looking for. My question is what chemicals do you use in a hottub to make it sanitary? and also how do you shock a hot-tub? 10 points to whoever is the most helpful, please list all of the chemicals.

    Thanks

  4. Tiffany M says:

    How do you mix chemicals for a hot tub???
    We recently just moved into an apartment that has a hot tub on the patio. However, we are not use to having a hot tub. We want to use it, but we have no book or anything showing us how to mix the chemicals we have. We have all the proper chemicals now we need to know how much of each to mix in so we dont ruin it. if anyone has any helpful tips please let us know as we are desperate!!!!

  5. Yinzer from Sixburgh says:

    http://www.rhtubs.com/cgi-bin/bbs/HTIC-config.pl?index
    http://www.poolandspaservice.com/askalan/mineral_problems.htm
    http://www.angelfire.com/mi2/hottubs/

    Above are three of my favorite Hot Tub advice sites. I’ve used them and also my local dealer is very helpful when I’ve taken a water sample in.

    I use Chlorine and I’ve been happy with the results. Occasionally, I add Clarifyer, Foam Reducer, and Scale Eliminator. Twice I’ve had to adjust the PH and alkalinity. Simple test strips is all I need to monitor the tub’s needs.

    I now have “city” water, which makes managing the tub much easier. Previously, my well water required much more monitoring, and I found myself doing a complete water change more often than recommended, which is typically 3 months, depending on use. Also, make sure you are cleaning your filters regularly. There is an acid solution you can soak them in which makes them like new.

    P.S. the foam is caused by YOUR body oils and skin products like shampoos, lotions, deodorants, etc. It is not the water causing it. That is where the Defoamer works. Only takes a few drops.

    Let me know if I’ve helped.
    Don’t you just love the spa?

  6. no_shoe_girl says:

    I just recently moved into a house with a pool and I had the same exact problem. I had all the chemicals and the pool was there and (it was summer) I wanted to use it. I ended up calling the local pool installing company in my area (they were also a pool supply store). They had people that would come out to your pool and set it up for you and explain to you how to use them chemicals and testing kits. You may want to call someone so they can come out and make sure the hot tub is working correctly and also they will let you know how to care for it.

  7. medicine_man_rn says:

    try these out. there are many choices for sanitizing.

    Mineral Sanitizers,

    chlorine,

    bromine,

    Ultraviolet UV Sanitizer, Sanitizes with UV rays instead of chemicals.

    ionization-oxidation systems, proven to eliminate bacteria, algae, and most viruses.

    Install an ozonator for cleaner water. Ozonators convert oxygen into ozone.

    Shocking a spa or hot tub refers to the application of non-chlorine shock or hydrogen peroxide. The purpose is to break down the combined chlorine, organic waste and contamination. Products such as sodium dichlor and non-chlorine shock are used for this purpose, with spas utilizing chlorine, bromine, ozonation, ultraviolet treatment, mineral purifiers or ionization.

    try this for the shock treatment, Oxy Spa Non-chlorine MPS spa & pool shock

  8. Tnnole says:

    Hot Tub Chemicals?
    I have been having problems with my hot tub for a while now. The water seems to stay cloudy and now it has a green tint to it. Also it gets a almost tan colored foam on it when we use it. What would be the best chemical to use in it? We have been using the BaquaSpa stuff with nothing but problems. Would it be better to use Bromine or Chlorine? Also we have a ozonator on the tub but all that it seems to be is a bubble pump. I can not tell a difference when it is on or off. Should it be used and does it really do anything?

  9. dlhouse says:

    Hot tub chemicals? Where do we start?
    We inherited a hot tub, it has reached 101 degrees, we test stripped for alkalinity, its ok, ph is low. We have shock, bromine,gentle spa, hardness stuff! Yikes! What to do?

Leave a Reply