Posts filed under “Spa Heaters”

Burning smell coming from cieling. help!!!?

Posted by admin on July 9, 2009. 5 comments.

ok, i’m not about to call 911 at 4:30 am, atleast not until i KNOW for sure that somthing is very wrong. so if you could help me with this, it’d be great. Here’s my problem: There’s a hallway in our house that has been described by my grandparents as "burning rubber". I’m not sure [...]

Electronic switch in spa, problem.?

Posted by admin on July 8, 2009. One comment.

I have a jacuzzi tub, that will not allow me to power the jets off. I have been troubleshooting from the button for the switch (on the tub). The buttons (5) all work correctly, except for the jet power button. The buttons seem to send a signal when it is depressed, and when you let [...]

cal spa hot tub keeps throwing the breaker, can you help?

Posted by admin on July 6, 2009. 3 comments.

I have checked the heater, main relay, pump and replaced the breaker, any suggestions?

My jacuzzi has never really worked the gravity and weight of the water in the tub?

Posted by admin on July 6, 2009. 2 comments.

causes the water to empty out because the heater and filter system is at a lower elevation then the actually spa. Does anyone know how i can fix this. I’ve already tried to build a system of pipes to raise the water up, but it really doesn’t work..Any idea’s?…thanks

Spa quite heating after?

Posted by admin on July 4, 2009. 2 comments.

Sundance spa. The flo error is on. Heater worked for about 10 degrees before it quite. It has a new board and a new temp sensor, the jets all seem to be working fine.

spa plaster (new) turning green?

Posted by admin on July 3, 2009. No comments.

i had gotten new plaster done on my spa,after a while i has problems with the water draining or something,which i got fixed.then some days later the plaster started to turn green.the pool guy then put some acid to remove the green but it came back,he said it could be some metal in the water(copper [...]

Can you please help me with repairing my Cal Spa? I am having problems with it heating.?

Posted by admin on June 30, 2009. One comment.

I recently purchased a used 2003 Cal Spa, Fiesta Atlantis, 450 gallon. Everything looks great and all seems installed properly. When I first started it it was on Economy Heating Mode and heated to 80 degrees and held this temperature. I reset it to standard heat mode and the heater and heater light would not [...]

Need Pool Help – Heater?

Posted by admin on June 29, 2009. One comment.

I want to turn my pool heater on but for it to turn on the pools' pipes have to go a certain way. The pipes are: Spa Return Pool Return Spa Return Pool Cleaner Spa Main Drain Pool Main Drain Skimmer please tell me which has to be open and which must be closed.

how to turn on this jaccuzzi?

Posted by admin on June 28, 2009. One comment.

i know nothing about jacuzzis. i'm house sitting and want to know how to turn the heat on in the jacuzzi. the heater is a raypak. it looks similar if not exactly like the one shown here: http://www.fixya.com/support/p1184302-raypak_rp2100_pool_spa_heater_lonox_40 when i switch the power on on the heater the little screen remains blank. can anyone help [...]

Has anyone tried to repair their spas?

Posted by admin on June 27, 2009. 4 comments.

I have an older Morgan spa, but it has not worked for a year. I am thinking of replacing the "spa pack" (moter, blower, heater). Has anyone had success in doing this themselves? If so, how difficult is it? Thanks!!!